Eliminate contaminants like sputters caused by moisture and oil with the Plasma Cutter Air Filter, which can trap particles as small as .01 microns, keeping your torch from short-circuiting. It’s recommended that you replace the filter cartridge every five to seven days.

• New and improved technology allows the filter to trap particles as small as .01 microns
• Extend the life of your consumables by protecting them from any moisture
• Filters up to 1250L/min

Specifications

• maximum Air Pressure:

  125 psi

  8.6 bar

  0.86 MPa

• Maximum Flow (L/min): 1250
• Temperature Range (C): -10 – 60
• Filtration Degree (m): 0.1
• Filter Cartridge Weight (g/m): 16
• Absorption Rate (mm/100s): 15
• Tensile Index (Nm/g): 3.0
• Moisture Content (%): 6
• Total Dust Filtration (pcs): 6
• Dust Filtration 0.2-1 mm (pcs): 4
• Dust Filtration 1-2 mm (pcs): 2
• Dust Filtration 2 mm (pcs): 0