Titebond Cold Press for Veneer is a high-quality, economical alternative to contact cement for large-scale bonding of veneers to flat surfaces. It is specifically formulated for cold press laminating of wood to solid woods, particleboard, MDF, plywood and other porous materials.Titebond Cold Press offers a moderate speed of set, a translucent glue line and contains none of the harmful or corrosive fumes typical of most contact cements. It also prevents bleed-through on open-grained and unbacked wood veneers.Features:-

• Economical alternative to contact cement
• Formulated to minimize ‘bleed-through”
• Moderate speed of set
• No harmful vapors
• Safe nonflammable

Physical Properties:-

Application TemperatureAbove 10 C.Open Assembly Time15 minutes (21 C./50% RH)Total Assembly Time15-20 minutes (21 C./50%RH)Minimum Required SpreadApproximately 6 square meters per litreRequired Pressure Application100-250 psi, depending on substratesMethod of ApplicationFor most consistent coverage a mechanical spreader is recommended.CleanupDamp cloth while glue is wet. Scrape off and sand dried excess.Technical Data:-

• Download MSDS Here.
• Download Data Sheet Here.