Overview

• suitable for tool cabinet ELORA-No. 1100L

• suitable for Roller Tool Cabinet Buddy ELORA-No. 1210-L7, Super Caddy ELORA-No. 1220-L7 and L8, ToolJET ELORA-No. 1225-L7

• suitable for cantilever tool box ELORA-Nr. 810-L

• suitable for hard protective case ELORA-No. 1380-L and hard protective trolley Case ELORA-No. 1381-L

• suitable for installation tool bag ELORA-No. 1385-L

Contents

• 146 Series Obstruction Spanner: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 17mm

• 113 Series Double Ended Ring Spanner Extra Short: 4×4.5mm, 5×5.5mm, 6x7mm, 8x9mm, 10x11mm

• 1455-M Series 6 Point Sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm

• 158-R1 Hex Key Set: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm

• 216 Series Hexagon Nut Drivers (Long): 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm

• 1450-1D: Reversible Ratchet 1/4″ Fine Tooth with Safety Locking

• 1450-3: Spinner Handle 1/4″ With Quatrolit 2C-Handle

• 1450-4: Sliding T-Bar 1/4″

• 1450-5: Extension Bar 1/4″ 100mm

• 1450-8: Universal Joint 1/4″

• 131BI-240: Waterpump Plier

• 476-BI 145: Flat Nose Plier with 2C-Handles

• 476-BI 170: Flat Nose Plier with 2C-Handles

• 477-BI 145: Round Nose Plier with 2C-Handles

• 477-BI 170: Round Nose Plier with 2C-Handles

• 490-BI 165: Heavy Duty Side Cutter with 2C Handles

• 494-BI 160: Wire Stripper with Restricted Opening with 2C Handles

• 495-BI 165 Combination Plier German Pattern with 2C Handles

• 900IS Series VDE Screwdrivers Plain Slot: 0.4 x 2.5mm, 0.6 x 2.8mm, 0.5 x 3.0mm, 0.8 x 4.0mm, 1.0 x 5.5mm

• 910PH Series VDE Screwdrivers Cross-Slot (Phillips): PH0, PH1, PH2

• 242K-60: Plastic Oiler 60ml

• 237-500: Flexible Magnetic Lifter

• 1665-100: Engineers Hammer 145g

• 566-150: VDE Voltage Tester

• 1591: Engineer’s Scriber Bended

• 257A: Junior Hacksaw Frame

• 740 Series Offset Key with Plastic Handle Plain Slot: 4mm, 5.5mm, 8mm

• 730 Series Offset Key with Plastic Handle Cross Slot: 1 + 3

• 271 Parellel Pin Punch: 2mm, 3mm, 4mm, 5mm

Specifications