Overview

9200 is a 2-part structural adhesive designed to create long-lasting load-bearing joints. It adheres strongly to metals, plus a wide range of materials that are difficult to bond to, including glass, ceramics, wood, engineered thermoplastics, and thermoset laminates, such as SMC (sheet molding compound) and GRP (glass-reinforced plastics). It evenly distributes stress throughout the entire bonded area and is especially useful for joining dissimilar materials that will experience thermal cycling stresses.

This structural epoxy adhesive creates tough vibration-resistant bonds, making it an ideal auto body panel adhesive. It is the best glue for aluminum and works well when used as an automotive structural adhesive or automotive panel adhesive.

9200 provides excellent electrical insulation, and protects against static discharge, thermal shock, galvanic corrosion, environmental humidity, salt water, fungus, and many harsh chemicals. It is smooth, non-sagging and thixotropic, so it is excellent for use on vertical surfaces and for gap filling.

It is also useful forpottingelectronics in enclosures with gaps where a non-thixotropic encapsulant would flow through. 9200 is viscous, yet flowable enough to be dispensed from a syringe. The 50ml size may be used with amixing tipwhen dispensing with acaulking gunor pressurized system.

For a 1-part adhesive, use9310. We also offerelectrically conductiveandthermally conductive adhesives.

Features & Benefits

• 1:1 mix ratio

• Working time: 30 min

• Cure time: 48 hrs at room temperature or 1.5 hrs at 65 C (149 F)

• Excellent bond strength to a wide variety of substrates

• Extreme resistance to vibration and temperature cycling

• Superior tensile, compressive and lap shear strength

• Excellent chemical resistance

• Excellent electrical insulating characteristics

• Non-sagging and gap-filling

• Ideal for bonding dissimilar materials

• Low shrinkage

• RoHS 3 compliant

Specifications

• Breakdown Voltage 41 500 V

• Dielectric Strength 503 V/mil

• Resistivity 2.5 x 1013 cm

• Hardness 73 D

• Tensile Strength 14 N/mm2

• Working Time: 30 Min

• Mix Ratio by Volume: 1:1

• Compressive Strength 64 N/mm2

• Lap Shear (stainless steel)20 N/mm2,(aluminum)22 N/mm2

• Glass Transition Temperature (Tg) 44 C

• CTE Prior Tg 95 ppm/C

• CTE After Tg 215 ppm/C

• Thermal Conductivity @ 25 C 0.3 W/(mK)

• Service Temperature Range -40150 C

• Packaging: Dual cartridge

• Net Volume: 45ml

• Net weight: 56.3g

Resources

Technical Data Sheet