Features

Milwaukee M12 FUEL 1/2″ Stubby Impact Wrench with Friction Ring (Tool Only)

Overview

Our new 1/2 Stubby Impact Wrench delivers maximum power, in a lightweight compact body and delivering 50% faster application speeds when compared to the previous generation. Leveraging POWERSTATE Brushless Motor, The M12 FUEL Stubby Delivers 0-3,000 RPM with up to 746 Nm of Nut Busting Torque, allowing the removal of corroded and stubborn applications. Our solution delivers on performance and size, at only 0.99 Kg for the bare tool. Users can expect less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can’t fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. A 4-Mode DRIVE CONTROL allows for greater precision. Featuring an AUTO SHUT-OFF mode that applies no more than 20 Nm of torque for hand-tight applications that prevent overtightening when in forward. In reverse, Bolt Removal Mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly.

Features

• Delivers up to 746 Nm of Nut-Busting torque and up to 542 Nm of fastening torque in a total tool length of 124mm.

• Designed to deliver improved performance in tight access application fastening and loosening tasks.

• Single handed mode change capabilities delivers increased productivity.

• 4-Mode DRIVE CONTROL provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode

• Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 Nm of torque.

• New Tri-LED shadowless lighting delivers high-definition visibility in tight access workspaces.

• Increased performance, lighter weight, and more compact when compared to M18FIW2F12 paired with a M18B5 battery.

• New Battery Isolation System for secured battery connection and reduced vibration transmitted to the pack

Specifications

• Platform: M12 FUEL

• Anvil Type: 1/2″ Square with Friction Ring

• Nut Busting Torque: 746 Nm

• Fastening Torque: 542 Nm

• IPM: 0 – 1,500 / 0 – 3,000 / 0 – 3,300 / 0 – 3,300

• No Load RPM: 0 – 930 / 0 – 2,100 / 0 – 3,000 / 0 – 1,300

• Drive Control: 4 Mode with Auto Shut-Off Mode & Bolt Removal Mode

• Length: 124mm

• Weight: 0.99kg

• Warranty – Tool: 5 Years

• Tri-LED: Yes

Milwaukee M12 FUEL 3/8″ High Speed Extended Reach Ratchet (Tool Only)

Overview

The M12 FUEL 3/8″ High Speed Extended Reach Ratchet is the latest addition to Milwaukee’s battery-powered ratchets. The M12 FUEL ratchets provide fast cordless speed with a slim head profile and an extended neck that will provide more access in tight spaces. Simultaneously, the recessed forward-reverse shift knob allows users to easily switch between tightening or loosening fasteners. The 3/8″ Ratchet provides performance of up to 47.5 Nm max torque, the same torque output as the M12 FUEL High Speed Ratchets. The High-Speed Extended Reach Ratchets feature an Investment Cast Steel Yoke housing and a POWERSTATE Brushless Motor that delivers great durability. The cordless ratchet features built-in REDLIINK tool technology to help users reduce fatigue and increase productivity.

Features

• Delivers 450 RPM under load.

• Extended reach and small head size paired with compact yoke housing allows for easier access in tight spaces.

• Recessed forward-reverse shift knob allows users to easily shift between fastening and tightening task without reducing access capabilities.

• Higher speed increases productivity and reduces user fatigue by minimising time spent handling tool in tight spaces.

• Up to 47.5 Nm of maximum torque output.

Specifications

• Platform: M12 FUEL

• Voltage: 12V

• Peak Torque: 47.5Nm

• RPM: 0 – 450

• Chuck Type: 3/8″

• Length: 363mm

• Weight: 0.91kg

• Warranty – Tool: 5 Years

• Head Width: 32.8 x 29.5mm

Milwaukee 3/8″ Drive 10 Piece Standard Metric Socket Set with Storage Rail

Overview

Our 3/8″ drive socket sets with dedicated storage rails have been designed from the ground up to be part of the most versatile socket family. MILWAUKEE sockets feature an innovative design with FOUR FLAT parallel flat sides which deter rolling on surfaces and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility, while the fastener attachment face has optimised geometry to increase torque and reduce bolt rounding. Our dedicated storage rails offers a simple and convenient way to store your sockets.

Features

• FOUR FLAT sides that are wrench-read and anti-roll

• Stamped sizes on sides for extra visibility

• Optimised geometry to increase torque and prevent rounding

• Dedicated storage rail

• 6 Point Socket

Specifications

• Type: Standard

• Drive Size: 3/8″

• Kit: Yes

• Socket Size: Multiple

• System of Measurement: Metric

• Length: 272mm

• Width: 43.8mm

• Height: 37.3mm

• Warranty: Limited Lifetime

Milwaukee REDLITHIUM USB Rechargeable Pocket Flood Light 3.0AH Kit

Overview

STICK IT. WEAR IT. CARRY IT. Powered by REDLITHIUM USB, the MILWAUKEE USB Rechargeable Pocket Flood Light delivers 445 lumens of TRUEVIEW High Definition output, and is capable of all-day runtime, over 2,000 recharges and 3X faster charging via USB. Stick, clip, and carry it anywhere with its dual magnet clip, perfect for mechanical, electrical, H/VAC-R, MRO, and automotive trades. The light is impact and chemical resistant to withstand harsh environments. With two light output modes, users can maximise brightness or extend runtime with up to 11 hours of light on a single charge. The REDLITHIUM USB Battery can be recharged in the light via Micro USB or swapped out with additional REDLITHIUM USB Batteries for virtually no downtime. The MILWAUKEE USB Rechargeable Pocket Flood Light is covered by a limited lifetime warranty.

Features

• Upgrade from 2.0Ah battery to 3.0Ah battery included in kit

• Two modes, up to 445 lumens of TRUEVIEW High Definition Output

• Up to 12 hours runtime when used with REDLITHIUM USB 3.0Ah Battery Pack

• IP54 (limited dust ingress and high-pressure water jets from any direction)

• Magnetic base and clip for convenient storage and hands-free use

Specifications

• Platform: REDLITHIUM USB

• Voltage: 4V

• Runtime: 2.5 Hours (High) | 12.5 Hours (Low) – L4B3

• Lumens: 445 (High) | 100 (Low)

• Kit: Yes

• IP Ratings: IP54

• Warranty: Limited Lifetime

Milwaukee M12 REDLITHIUM High Output 2.5Ah Compact Battery

Overview

The M12 REDLITHIUM HIGH OUTPUT 2.5Ah Compact Battery delivers 25% more power and runs 25% cooler than the M12 REDLITHIUM 2.0Ah Compact Battery. This increased performance of the lithium-ion battery gives you the same power and runtime of an M12 REDLITHIUM battery in a lighter and more compact package. The 12-volt battery pack runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Its compact, lightweight design allows you to work in tight workspaces and reduces fatigue. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below -18C. In addition, the M12 REDLITHIUM HIGH OUTPUT 2.5Ah is built with a resistant housing, providing increased protection against exposure to common oils, greases, and solvents found in automotive and manufacturing environments. The M12 REDLITHIUM HIGH OUTPUT 2.5Ah battery is fully compatible with Milwaukee M12 solutions.

Features

• M12 REDLITHIUM HIGH OUTPUT 2.5Ah Compact Battery runs up to 25% cooler vs M12B2

• Increased thermal protection is optimised for high draw tools ensuring batteries dont overheat even in the toughest applications

• REDLINK intelligence provides optimised performance and overload protection

• M12REDLITHIUM HIGH OUTPUT 2.5Ah Compact Battery delivers 25% more power vs M12B2

Specifications

• Platform: M12

• Voltage: 12V

• Battery Type: HIGH OUTPUT

• Amp Hour: 2.5

• Weight: 0.18kg

• Warranty – Battery/Charger: 2 Years

Milwaukee REDLITHIUM High Output 5.0AH Battery

Overview

The M12 REDLITHIUM HIGH OUTPUT 5.0Ah Battery delivers 25% more power and runs 25% cooler than the M12 REDLITHIUM 4.0Ah Battery. The increase in power elevates the performance of the entire M12 system and drives the next breakthrough in M12 FUEL. The lithium-ion battery runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Each battery pack is built for heavy-duty use, runs cooler, and performs in climates below -18C. In addition, the M12 REDLITHIUM HIGH OUTPUT 5.0Ah Battery is built with a resistant housing, increasing the protection against exposure to common oils, greases, and solvents found in transportation maintenance and manufacturing environments. The M12 REDLITHIUM HIGH OUTPUT 5.0Ah battery is fully compatible with Milwaukee M12 solutions.

Features

• M12 REDLITHIUM HIGH OUTPUT 5.0Ah Battery runs up to 25% cooler vs M12B4

• Increased thermal protection is optimised for high draw tools ensuring batteries dont overheat even in the toughest applications

• REDLINK intelligence. Provides optimised performance and overload protection

• M12 REDLITHIUM HIGH OUTPUT 5.0Ah Battery delivers 25% more power vs M12B4

Specifications

• Platform: M12

• Voltage: 12V

• Battery Type: HIGH OUTPUT

• Amp Hour: 5

• Weight: 0.4kg

• Warranty – Battery/Charger: 2 Years

Milwaukee M12 Lithium-Ion Battery Charger

Overview

Quickly charges all M12 batteries. Power up your M12 REDLITHIUM in less than an hour with the M12 Lithium-Ion Charger. It communicates directly with the battery pack to manage charges and features an easy-to-load design. The chargers slim profile requires little bench-top room, while the pass-through plug conserves valuable outlet space. Monitor battery charges for all of your M12 cordless tools with the onboard indicator light.

Features

• Single unit simplicity: Charges all M12 Batteries

• Charge management: Charger communicates with the battery pack to ensure a full charge and battery protection

• Onboard indicator light: Provides the status of the battery

Specifications

• Platform: M12

• Voltage: 12V

• Weight: 0.7kg

• Warranty – Charger: 2 Years