Overview

Dual layer static dissipative rubber matting is a premium quality, highly durable work surface for ESD sensitive environment.

The dissipative top layer is resistant to abrasion, heat, solder, flux and most commonly used solvents.

The black conductive bottom layer provides a superior and consistent ground path.

These mats meet the requirements of US ESD Associations ANSI S4.1 and S20.20 guidelines. This product is also RoHS certified.

We have blue and grey available. Unless specified at time of ordering we will send what is available

ACCESSORIES REQUIRED FOR GROUNDING (AVAILABLE AT ADDITIONAL COST):

ESD Hardware Kit – including Push & Clinch Male Snap Stud 10mm, Dual Jack Ground Cord, Clipsal Grounding Plug, Adjustable Wrist Strap & Cord 6′

ESD Hardware Kit Plus including Push & Clinch Male Snap Stud 10mm, Low Profile Dome Top Ground Cord, Under Bench Grouding Mount, Clipsal Grounding Plug, Adjustable Wrist Strap & Cord 6′

Specifications

• Size: 600 x 400mm

• Material: Synthetic rubber

• Construction: Two-layer, static dissipative top surface, black conductive bottom layer

• Thickness: 0.076 inch (2.00mm) -(nominal)

• Colour: We have blue and grey available. Unless specified at time of ordering we will send what is available

• Scratch Resistance: No clear scratch and well recovery

• Heat Resistance: Resist hold irons and hot paste

• UV Resistance: No discoloration

• Chemical Resistance: With nodiscolorations after contacting with IPA, acetone or commonly used solvents

• Point to point resistance: 1E6 to 1E8 ohms per ANSI/ESD S4.1

• Point to ground resistance: 1E6 to 1E8 ohms per ANSI/ESD S4.1Charge Decay: < 0.1 sec per FTMS 101C, M4046

• Others: No curling, No pin holes, No irritant odour