For edgebanding pre-glued PVC, polyester, melamine, and wood veneer. Allows the veneer of circular or shaped pieces. Its special adjustable jaw design allows for high precision and stability. Practical, built-in edgebanding system. Possibility of gluing flush or with excess on either side. Setup time: less than a minute. Two edgebanding feeding systems: Support for rolls of pre-glued edgebanding up to 1 mm thick and 50 mm wide. Manual feed for pre-cut strips for veneering edges up to 3 mm thick and 25 mm wide. Also included as standard is a roll holder for veneering rolls. Manual feed for pre-cut strips for veneering edges up to 3 mm thick and 25 mm wide with high precision and stability.Specification

• Double insulation
• Power:1,500 W
• Max. width to be edged (with 1 mm thickness):50 mm
• Max. width to be edged (with thickness of 2 or 3 mm) Pre-cut strip:25 mm
• Temperature I:300C
• Temperature II:525C
• Approx. flow rate:400 l/min
• Weight:2.8 Kg

Optional accessories

• AU93 Double edge trimmer
• RC21E Manual end trimmer
• RC221R Hand end trimmer (for 2 mm PVC tapes)
• 5246025 Roller at 4 specially designed for banding sloping surfaces on doors etc.